Canon IMAGE RUNNER 5075 - Manual (Page 81)

Settings Menu 3-13
3
Pr
inter Settings Menu
Q Density
1 to 9; 5 *
This setting adjusts the print density.
Pressing [Dark] makes the print image darker, pressing [Light] makes the image
lighter. This setting has 9 levels you can adjust, with level '5' (middle level) being
the default setting.
NOTE
This function is not available if 'Toner Save' is set to [On].
Q Toner Save
On, Off *
This setting enables you to set the Toner Save function. Toner Save uses less
toner to print documents and may result in longer toner life.
NOTE
š The function is not available if 'Resolution' is set to [1200 dpi].
š Depending on the data to be printed, 'Toner Save' may not be applied even if [On]
is selected.
š If [On] is selected for 'Toner Save', very light or finely detailed images may not be
printed clearly.
Q Line Refinement
On, Off
This setting enables clearer printing of fine lines and small characters, or when
you want to print characters and lines thicker.
NOTE
š This setting remains in effect even when the printer job is sent to a box.
š The default setting will differ according to the model you use.
- imageRUNNER 5075/5065/5055: On
- imageRUNNER 5050: Off