Canon IMAGE RUNNER 5075 - Manual (Page 102)

Settings Menu 3-34
3
Pr
inter Settings Menu
Use Cover Inserter
On, Off *
This setting enables you to specify whether to add a cover at the front of the
printed output.
If [On] is selected, a cover is inserted automatically at the front of the printed
output. If used in combination with Staple settings, it is a handy function for
arranging documents.
The paper to be used as the cover should be placed in the inserter.
IMPORTANT
š Nothing will be printed on the paper used for the cover.
š You cannot use this function in combination with 'Transparency Interleaving'.
š This function cannot be used if the 'Finishing' is set to [Off], [Collate],
[Rotate+Collate], [Rotate+Group], [Offset+Group], or [Staple+Group].
NOTE
š This function is available for selection if the Document Insertion/Folding Unit-F1 is
attached to the Finisher-AD1 or Saddle Finisher-AD2.
š This function can be used in combination with [Staple+Collate], 'Punch', and
'Z-Fold'.
š You can place the following paper sizes and types in the inserter:
- Paper sizes: 11" x 17", Legal, Letter, Letter-R, EXEC, A3, JIS-B4, A4, A4R,
JIS-B5, or JIS-B5R
- Paper types: Plain Paper, Recycled Paper, Color Paper, Letterhead, Heavy
Paper, Tab Paper, or Bond Paper
R E P O R T
3
2
R E P O R T
3
2
1
R E P O R T
3
2
1
1
R E P O R T R E P O R T
3
2
1
Paper placed
in the inserter
Output Paper On