Canon IMAGE RUNNER 5075 User Manual
Page 176
When a Message Is Displayed
6-8
6
Tro
uble
shootin
g
PDL PDF Font Error Error
Skip
Cause
There is font in the PDF data that cannot be processed.
Remedy 1 After canceling the print job, try printing again with PDF data that is compatible
with the machine.
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
PDL PDF HDD Access Error
Cause
An error occurred while the hard disk was loading in PDF 1.5 Mode.
Remedy
Reset the printer to increase the amount of available memory and print again.
(Note that all the data stored in the memory that was received by the machine
will be deleted.) (See "Reset Printer," on p. 3-62.)
PDL PDF Initialize Error
Cause
An error occurred when the PDF file started printing.
Remedy
Reset the printer to increase the amount of available memory and print again.
(Note that all the data stored in the memory that was received by the machine
will be deleted.) (See "Reset Printer," on p. 3-62.)
PDL PDF Memory Full
Error Skip
Cause
The machine's memory space allocated for PDF1.5 is full and printing cannot
proceed.
Remedy 1 After canceling the print job, reset the printer to increase the amount of
available memory and print again. (Note that all the data stored in the memory
that was received by the machine will be deleted.) (See "Reset Printer," on p.
3-62.)
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.