B&G H5000 Pilot Computer - Manual (Page 17)

| 17 Operation | H5000 Operation Manual
Operation
Graphic display
MENU
1
2
3
4
5
Basic operation
The fi rst display added to the network will go into a startup wizard when it is fi rst powered on.
The startup wizard will need to be completed before the display can be used.
Using the wizard, set the desired language, time, units and network source selection.
1 PAGE
Each short press of the PAGE key scrolls through the data pages. When viewing a data page a long
press of the PAGE key will bring up the pages menu, from here the required page can be selected
directly from a list. From any dialog screen, pressing the PAGE key navigates back to the data pages.
When using a menu the PAGE key navigates back a step.
2 UP
Scrolls up through selected menus / set values
3 ENTER
Used to enter the selected sub menus and confi rm selection
4 DOWN
Scrolls down through selected menus / set values
5 MENU / LIGHTS
Single press of the MENU key – displays the Page menu
Double press of the MENU key – displays the
Settings menu
Long press of the MENU key - Enters the display setup dialog and light settings menu.
Display group
Light settings are replicated on all displays set to the same group.
Backlight level
Min to Max in 10% increments
Night mode
Alternative display palette for low light conditions.
Night mode color
Red, green, blue, white text color
¼ Note: Adjusting the backlight settings will eff ect all other displays in the same display group.
See Network groups for more information.
4
MENU