B&G H5000 Pilot Computer - Manual (Page 81)

| 81 Operating variables | H5000 Operation Manual
Barometric pressure
There is a calibration if you wish to check your pressure reading against another barometer.
CAL VAL1 should be set to the current correct barometric pressure.
Variable name (default)
Function name
Barometric Pressure (BARO)
BARO
Units mb
Alarms N/A
Calibration N/A
Damping N/A
Battery voltage
Battery Voltage displays the power supply voltage measured internally by the CPU.
Variable name (default)
Function name
Battery Volts (BATT)
BATTERY
Units V
Alarms High, Low
Calibration Off set (set to known value)
Damping N/A
Bearing to waypoint
Bearing To Waypoint displays the bearing from the yachts current position (Boat Position) to
the current active waypoint.
This function repeats information received from a position fi xing device (e.g. GPS) via a NMEA
input.
Variable name (default)
Function name
Bearing origin to destination
WPT BRG
Units
ºM, ºT
Great Circle, Rhumb Line
Alarms High, Low
Calibration N/A
Damping N/A