B&G H5000 Pilot Computer - Manual (Page 41)

| 41 Operation | H5000 Operation Manual
Checksum
Additional version information in hexadecimal format. This information is for B&G support
only.
1
2
No. Description No. Description
1 Boot code 2 User code
Full reset
Factory reset of the display. All settings will revert to factory default. Select the full reset page,
press
the ENTER key and a full reset will take place and return the display back to the default
speed and depth page.
User reset
Resets page confi guration to their default settings. All other settings will remain unchanged.
Select user reset, press
the ENTER key . The display will show complete once fi nished.
LCD segment test
When the LCD segment test page is selected the display will automatically begin the LCD test.
This is a visual test that needs to be performed by the user. Each segment will switch on in
sequence until all segments are lit. It is the responsibility of the user to visually spot any faulty
/ missing LCD segments.
Missing
segment