B&G H5000 Pilot Computer - Manual (Page 33)

| 33 Operation | H5000 Operation Manual
Alarm indication
The alarm system is activated if any alarm settings are exceeded. Alarms are indicated with an
alarm text and with an audible alarm (optional).
¼ Note: See Alarm settings for further details on how to set an alarm. If an autopilot is not on
the network, autopilot alarms will not be accessible.
If no specifi c alarm text is available, an alarm code will appear.
Acknowledging an alarm
An alarm is acknowledged by pressing the ENTER key. This will remove the alarm notifi cation,
and silence the alarm from all units that belongs to the same alarm group. A reminder will
reappear at given intervals for as long as the alarm condition exists.
¼ Note:
An alarm received from non B&G units on the network must be acknowledged on the
unit generating the alarm.
Alarm history
The alarm history can be accessed via the Alarm history menu. This stores alarm messages
until they are manually cleared.
Clear alarm history
To clear the alarm history list, select ‘Clear All’ from the Alarm history menu.