B&G H5000 Pilot Computer - Manual (Page 61)

| 61 System setup | H5000 Operation Manual
Restore defaults
Restore Defaults has the option to wipe all settings or partial settings out of the Graphic
Display. Select the data from the list that you wish to delete.
¼ Note: This is not a network function. This will only reset and delete history on the display that
‘Restore defaults’ is selected on.
Global reset
The global reset will reset all settings in all displays along with performing a network reset
removing all source selection.
¼ Note:
After performing a global reset the Graphic Display will ask to do an auto source
selection.
About
Shows the device information and software version currently installed on the display. Press
the ENTER key to navigate back to the menu