B&G H5000 Pilot Computer - Manual (Page 73)

| 73 Webserver | H5000 Operation Manual
Webserver
The B&G Webserver is an easy to use web-style portal that lets you calibrate instruments,
confi gure displays and choose from an array of features. You can also access product manuals,
data backups and system diagnostics.
¼ Note: An up to date web browser that supports web sockets must be used to access the B&G
webserver.
Connecting to the webserver
¼ Note:
Before you can you use the B&G webserver you will need to connect your PC directly to
the H5000 CPU via an ethernet cable or wirelessly via a WiFi-1 router.
Direct via Ethernet
Connect a computer directly to the H5000 CPU via an ethernet cable.
1 Connect device to the H5000 CPU via the ethernet port
2 Open web browser on the connected computer or device
3 Type the IP address [ 192.168.0.2 ] into the web browser address bar
¼ Note: Unit will attempt to select a DHCP server for 2 minutes after power on. If the server is
not detected the unit will revert to IP address [ 192.168.0.2 ]
¼ Note:
Ensure that your computers network settings are set so you can access this IP address
7