B&G H5000 Pilot Computer - Manual (Page 39)

| 39 Operation | H5000 Operation Manual
Backlighting
Set the desired lighting level on the display.
¼ Note: All units in the selected lighting zone will mirror each others light settings. Default
setting is network. To change the lighting zone select the lighting menu and press DOWN
the lighting zone type will fl ash. Select the desired zone and press
the ENTER key .
MENU
Trip log
There are two recorded trip logs. Trip log 1 records distance traveled through the water, trip
log 2 records distance traveled via GPS input.
¼ Note: Trip log 2 requires a compatible GPS connected to the network.
Start trip log
MENU
x3
Stop trip log
MENU
x3
Reset trip log
Alarms
When alarms are set to ‘On’ the race display will show alarm messages when predefi ned
alarm parameters on the network are triggered. When the race display alarm is set to off , no
alarm message will be displayed on the race display.
MENU
x8