Carlo Gavazzi PQT-90 - Manual (Page 11)

❑
Dual tariff setup
[1] Select the reference tariff.
[2] Select the Start Hour and the End Hour of the time peri-
od. The Start Hour of the following tariff is automatically dis-
played in the gray box of the second tariff.
[3] Select the tariff of reference.
[4] Select the End Hour of the second tariff. Proceed in the
same way until the required number of tariffs is reached.
[5] Programme the Holiday period: set the start date and the
end date and the relevant applied tariff.
PQTSoft Remote
Configuration
29
19
PQTSoft Remote
18
Configuration
8
❑
Tariffs and installed power setup
This function allows the user to choose the type of manage-
ment of the energy meters.
[1] Selects the type of tariff to be applied. “Single tariff”: the
energy meters are set according to a single tariff which is the
same for the whole year. “Dual tariff”: the energy meters are
set with 4 different tariffs per day and two time periods per
year (whole year/holidays). “Multitariff”: the energy meters
are set with up to eight time periods per day (4 different tar-
iffs) and three time periods per year (winter, summer and
holidays).
[2] Selects if the remote tariff selection by means of digital
inputs is to be activated or deactivated. It can be activated
only if the digital input modules are inserted in slot A and C.
1
2
1
2
5
3
4