Carlo Gavazzi PQT-90 - Manual (Page 25)

PQT-90 Instruction manual
Installation
Output modules specifications
52
61
47
PQT-90 Instruction manual
46
Installation
40
This diagram is valid also
for the single output open
collector module.
The value of the load
resistances (Rc) must be
chosen so that the short
circuit current is lower
than 100 mA; the VDC
voltage must be lower
than or equal to 30VDC.
❑
Relay outputs
❑
Open collector outputs
AO1058 Single relay
outputs. AO1035 Dual relay
outputs.
AO1059 open collector single
output.
AO1036 open collector dual
output.
1 analogue output (mA)
1 analogue output (V)
2 analogue outputs (mA)
2 analogue outputs (V)
❑
Analogue outputs