Carlo Gavazzi PQT-90 - Manual (Page 36)

Setup
Main menu
69
72
PQTSoft Network
69 68
Setup
PQTSoft Network
■
Installing PQTSoft Network
When the CD-ROM is
inserted in the drive, the
installation software is
automatically executed
(the CD-ROM drive is to be
enabled) and the dialog
box on the left is dis-
played. If the setup will not
run, select “explore CD-
ROM” and manually exe-
cute the application dou-
ble clicking the icon
.
Then, choose the operating system and the desired lan-
guage from the drop-down menus (see figure above). Press
“Install” to carry on with the installation following the instruc-
tions given in the following dialog boxes.
It is recommended to save all current jobs and close all
open applications before installing the PQTSoft
Network.
■
Uninstalling PQTSoft
Select “Uninstall PQTSoft” to start the guided uninstallation
of PQTSoft.
■ The software in brief
The PQTSoft Network has been developed for the data
transfer from the instrument (PQT90) to the PC. The data
download from PQT90 to the PC allows the reading and
saving of the values logged in the 2MB memory of PQT; the
values can be saved as an Excel table.
The PQTSoft Network has been mainly developed to auto-
matically download the values logged in the PQT; it is there-
fore necessary to configure first of all the “automatic data
download” dialog boxes. The data transfer can be carried
out in various modes: it depends if the PQT is part of a local
or of a remote network of instruments. The figure on the fol-
lowing page shows the possible communication modes
and the correct selection to be made in the PQTSoft
Network.