Carlo Gavazzi PQT-90 - Manual (Page 39)

❑
Folder selection for data files, counter file and
event file
[1] Tick the box on the left to select the data to be down-
loaded from the data logging of the instrument relevant
to the preselected variables and/or the meters and/or
logged events.
[2] It is possible to select the desired directory where the
data are to be saved by means of the relevant “....” button
(see figure above).
[3] For the data relevant to the variables it is possible to
automatically obtain the conversion into XLS format (useful
to display files as Microsoft Excel) by ticking the “automatic
create XLS files” check box.
Once this phase is completed, proceed with the next set-
tings by clicking the “Next” button.
1
1
2
2
2
3
Configuration
PQT/Excel data converter
83
88
PQTSoft Network
75 74
Configuration
Mode and connection type
72
70
PQTSoft Network
1
2
1
❑
Selection of phone numbers and dialling properties
If in the “Communication setup” dialog box the option
“modem” has been selected, then also the telephone num-
ber/s to be dialled by PQTSoft for the modem connection
with the PQT/s remote will have to be selected. Type in the
“Data file folder” column the name of the folder where the
data are to be saved and type also the number of instru-
ments related to that telephone number.
[1] Enable the desired contacts by selecting “ON” in the
“Selection” column, as shown in the figure above. The
PQTSoft will dial, one by one, all the enabled phone num-
bers, downloading the data of each related PQT; should one
of the remote connections not have a positive result (e.g. the
line is engaged), then PQTSoft will pass on to the following
number until the list of the “ON” selected contacts is com-
pleted. Any connection error will be shown to the user.
For any further information on the “Selection of phone
numbers and dialling properties”, see on page 87.