Carlo Gavazzi PQT-90 - Manual (Page 40)

❑
If “Local network of instruments (RS485)” was selected
If the “Local network of instruments (RS485)” has been
selected in the “communication parameter” setup, in addi-
tion to selecting the directory for the files to be saved, [1]
the user also has to enter the number of PQT-90s present in
the network (from 1 to 100) using the arrows in the numeric
box named “Network number of PQT” (Number of PQTs
located on the network). This selection box is only valid for
the selection “Local network of instruments (RS485)”; for the
other selections this box will not be shown.
❑
Setting expiry date for automatic data download
[1] Select expiry date for automatic data download
Configuration
83
PQTSoft Network
77 76
Configuration
72
PQTSoft Network
1
1
2
Daily: PQTSoft Network will download the data in the peri-
od specified by the “daily expiry date” box. The exact expiry
date is shown in bold letters after “Next expiry date...”.
Weekly: PQTSoft downloads the data once a week. The PC
will download the requested data at 00,00 of the first
Monday following the activation of the measurement; the
next download will be carried out at intervals of one week.
The date and time are shown in bold after “Next expiry
date...”.
Every two weeks: PQT-90 downloads the data every two
weeks. The PC will download the requested data at 00,00 of
the Monday following the date of activation of the measure-
ment. The following download will be carried out at intervals
of two weeks from the previous one. The date and time are
shown in bold after “Next expiry date...”.
Monthly: PQTSoft downloads the data monthly. The PC will
download the requested data at 00,00 of the first day of
each month. The date and time are shown in bold after
“Next expiry date...”.
Tick one of the above check boxes according to your needs.
To complete the setup procedure, press the “End” button.
[2] Before automatic connection with PQT request a
confirm: PQTSoft will ask the user for a confirmation before
connecting to PQT.
[2] If error, disable the automatic control: should PQTSoft
find an error while downloading data, it will disable the fol-
lowing controls.
[2] Activate automatic control at once end this wizard:
PQTSoft will activate automatic control at the end of this
wizard, that is when the “End” button is pressed. In this
case the main menu will disappear, the software will contin-
ue working in the background and an icon will appear on the
Windows application-bar.