Compex Technologies WPE54 - Manual (Page 129)

Appendix III TCP/IP Configuration
128
2. Right click on the Wireless Network Connections with the access point and
click on
Properties . Select the Internet Protocol (TCP/IP) and click
Properties .
3. Configure your IP address and the rest of the parameters so that you can be
connected to the network.
4. If your access point is configured as a DHCP server, you have to select Obtain
an IP address automatically.
5. If your access point (AP) has a certain IP address. In order to communicate with
the AP, you would have to assign an IP address with the same first 3 sets of
numbers and a different set of number for the last set to differentiate your laptop
and the access point in the network. The subnet mask would be 255.255.255.0
NOTE
Please check with your system administrator or Internet Service Provider for
more information on the TCP/IP parameters.