Compex Technologies WPE54 - Manual (Page 65)

Chapter 4 Common Configuration
64
4.5.1 How to set up WEP
[Available in ALL modes]
The guidelines below will help you to set up the access point for using WEP.
Security Mode -WEP
At the WEP Setup page:
Select whether to use WEP
64bit or WEP 128 bit.
Click on
Apply .
The access point lets you define up to four different WEP keys.
Specify the key entry format, by selecting either:
•
Use Alphanumeric Characters
•
Use Hexadecimal
Enter your WEP keys in the Key fields.
When using 64-bit encryption:
Your WEP key has to be either 5 alphanumeric characters or 10 hex characters long.