Chapter 3 access to web-based interface – Compex Technologies WPE54 User Manual
Page 25
Advertising
Chapter 3
Access to Web-based Interface
24
3.
Next, select on Internet Protocol (TCP/IP) and click on
Properties
button.
4.
Since the default IP address for the access point is 192.168.168.1, we need to set
your PC’s IP address to be the same subnet as your access point. Therefore, in
this example, we assign an IP address of 192.168.168.100 and subnet mask as
255.255.255.0.
5.
Click
OK
button to update the
changes.
6.
Now, you may open the MS-DOS prompt window and type in ping
192.168.168.1 to verify whether your PC can communicate with the access point.
Advertising