Compex Technologies WPE54 - Manual (Page 80)

Chapter 5 Further Configuration
79
4.7 SNMP Setup
Simple Network Management Protocol (SNMP) is a set of communication protocols that
separates the management architecture from the architecture of the hardware devices.
Enabling SNMP
Click on SNMP from the CONFIGURATION menu.
Select Enable from the SNMP State drop-down list.
The default Read Password is set to public while the default Read/Write Password is
private.
Click on the
Apply button.
4.8 MAC Filtering
MAC Filtering acts as a security measures by controlling the users from accessing to the
network. This can be easily done by adding the user’s MAC address to the listing and
from there, you can choose whether the particular user is allowed to access to the
network or not. Simply click on the radio button besides Allow PCs listed to access
network, or Prevent PCs listed from accessing network to activate the function.