Compex Technologies WPE54 - Manual (Page 69)

Chapter 5 Further Configuration
68
4.5.3 How to set up 802.1x/RADIUS
[Available in Access Point mode ONLY]
The guidelines below will help you to set up the access point for using
802.1x/RADIUS.
Security Mode –802.1x/RADIUS
At the WLAN Security Setup
page:
Select 802.1x mode.
Click on
Apply button.
Key in the IP address of the
Primary RADIUS Server in
your WLAN.
You can optionally add in the
IP address of a Secondary
RADIUS Server, if any.
[Refer to the section on How to set up WEP.]
Press the
Save button.
Click on
Reboot to restart the system, after which your settings will become effective.
The RADIUS authentication server MUST be in the same subnet as the access point.