Compex Technologies WPE54 - Manual (Page 56)

Chapter 4 Common Configuration
55
On the Add WDS Link screen
that appears:
Fill up the Partner Address
field with the MAC address of
the device to include in your
WDS, using the format xx-xx-
xx-xx-xx-xx or
xx:xx:xx:xx:xx:xx or a mix of:
and -, and where x can take any
hexadecimal value 0-9 or a-f.
Use the Status option to control whether you want to Enable this particular WDS link or to
Disable it.
Click on the
Apply button.
The WDS Status page will be
updated as shown on the right.
If you want to modify the status
entry for a WDS link:
Select the radio button on the
left of that particular link as
illustrated below left.
Click on the
Edit button.
At the Edit WDS Link page
which shows:
Select whether to enable or to
disable the WDS link.
Click on the
Apply button for
the changes you made to take
effect.