Compex Technologies WPE54 - Manual (Page 97)

Chapter 5 Further Configuration
96
5.4 Routing
(Only available in Gateway and Wireless Routing Client mode)
The access point supports both static routing so that you can manually add entries into
its routing table and dynamic routing, where it will automatically update the routing
table, whenever necessary.
NOTE
The default settings of the access point are sufficient to allow broadband
Internet sharing. There is NO need to configure any further routing
information.
Please note that improper routing settings will cause undesired effects!
The diagram illustrates one of the access points (X) functioning as Internet gateway to
wireless clients while another of the access points (Y) connects to the office’s remote
resources.
The routing table of X can be modified so that if its wireless clients intend to use the
remote office resources, data packets are automatically redirected to Y.