Chp.8: customizing the printer, Factory default settings, Chapter 8 – Canon BJ-200ex User Manual

Page 103: Customizing the printer factory default settings, Chapter 8 customizing the printer

Advertising
background image

Chapter 8

Customizing the Printer

This chapter describes the factory default settings of the printer and the steps you
follow to customize these settings for your particular printing needs.

You will find that the factory default settings provide features to meet most of
your printing needs. With these settings, your printer emulates any Canon BJ
printer and the IBM Proprinter X24E. This means you can use the printer with
any software application that supports these printers.

Make sure the printer's settings match the requirements of your software
application. If you have a unique printing requirement, you can customize the
printer by changing the DIP switch settings as described in this chapter.

Your printer defaults to BJ-10 mode and provides numerous printing features in
this mode. If your software application is designed to print only on an Epson LQ
printer, you can use the DIP switches to change the printer control mode to Epson
LQ.

You can also enable automatic emulation switching, which allows the printer to
switch between BJ-10 mode and Epson LQ mode.

The DIP switches are located under the cover on the left side of the printer.

Factory Default Settings

The following table shows the factory default settings of the printer:

Function

Setting

Printer control mode

BJ-10

Character Pitch

10 characters per inch (cpi)

Line spacing

6 lines per inch (lpi)

Print quality

High quality (HQ) mode

Beeper

Enabled

Automatic carriage return (CR)

Disabled (no CR with line feed)

Automatic line feed (LF)

Disabled (no automatic LF after CR)

Slashed zero

Disabled (zero not slashed)

Vertical tab stops

No vertical tabs set

Horizontal tab stops

Column 9 (then every 8th column)

Vertical margins

Top margin = first print line
Bottom margin = page length

Horizontal margins

Left margin = 0
Right margin = maximum print width

Page length

11 inches

Horizontal print position

Letter

Print direction

Bi-directional

Font typeface

Courier

Character set

Character Set 1

Code page

437 (IBM USA)

Buffer

Input = Approx. 41.2 KB
Download = 0 KB

Text scale mode

Disabled

Envelope mode

Disabled

Advertising