Canon BJ-200ex - Manual (Page 19)

1. Make sure both the printer and the computer are
turned off.
2. Connect the parallel cable.
§ Align the cable connector with the printer's interface port so
the shapes match.
§ Gently press the cable connector into the port.
§ Secure the cable connector by snapping the two wire clips
(located on the printer) into the cable connector.
3. Connect the other end of the interface cable to the
parallel interface port on your computer.
Installing the Ink Cartridge
You use the BC-02 ink cartridge with this printer.
Each ink cartridge can print about 400 to 500 letter-
size pages (700,000 characters) in HQ mode and 800
to 1000 pages (1,400,000 characters) in HS mode.
The actual amount varies according to the print
density of a page. If you print a lot of graphics, you
may need to change cartridges more often.
NOTE: Canon makes numerous ink cartridges; the BC-02 is
designed specifically for the BJ-200ex and is the only one you
should use. Using the BC-01 cartridge will result in decreased
print quality.