Canon BJ-200ex - Manual (Page 27)

To check that you have properly set up the printer, you can
print one of the printer's test patterns. The test patterns are
described in detail in the next chapter. For now, print Demo
Print 1:
1. Press the POWER button to turn off the printer.
§ Wait a few seconds.
2. Make sure the paper is loaded.
3. Press and hold the ON LINE button, and press the
POWER button until the printer beeps twice.
§ The two beeps are approximately three
seconds apart.
The printer starts to print Demo Print 1:
4. To stop printing the Demo Print, press the ON LINE
button for one second.
§ The printer stops printing, ejects the page,
and goes back on-line.
Installing a Printer Driver
Before you can print documents from your software
applications, you must install the appropriate printer driver