Canon BJ-200ex - Manual (Page 78)

Form feeding
If you are loading paper, make sure the printer is off-line.
Press the LF/FF button to load the first sheet of paper to its
top of form. (If you are running a software application, you
don't need to perform this step. The application will tell the
printer when to load paper.)
Line feeding
When a sheet of paper is loaded and the printer is off-line,
press the LF/FF button to advance the paper one line. Press
the button repeatedly to feed many lines.
Ejecting paper
To eject a sheet of paper, make sure the printer is off-line,
then press and hold the LF/FF button for more than one
second. The printer will eject the current sheet of paper.
Selecting a Print Mode
Your printer incorporates two print modes that allow you to
choose between print speed and print quality:
Print mode Function Speed at 10 cpi
HS High speed and draft
quality printing 248 cps
HQ High quality printing 204 cps
Smoothing High quality print with
polished edges
You use the PRINT MODE button to select the current
print mode when the printer is off-line. The default
selection is HQ mode. Pressing the PRINT MODE button
toggles from HQ to HS mode. The HS and HQ lights
indicate which mode is selected.
The print mode may be overriden by your software application.