Canon BJ-200ex - Manual (Page 53)

8. Make sure the printer is on-line and start your print
operation.
Turning Off Envelope Mode
After printing on envelopes, follow these steps before
loading normal paper again:
1. Set the paper selection lever (on the right side of the sheet
feeder) to the back position.
2. Set the green paper thickness lever (inside the printer) to
the left position.
3. If you enabled the envelope mode, disable it now.
§ Make sure the printer is on-line; then press
and hold the LF/FF button and press the ON
LINE button.
§ Press the ON LINE button to set the printer
back on-line.
4. In your Windows driver, change the Media Size setting
back to 8.5 x 11 inches or to the paper size you are using.
Printing on Legal-size Paper
You can print on legal-size paper by selecting a page size
of 8.5 x 14 from within your software application or from
the printer setup program within the application.
For example, if you are using Windows, simply select
Legal for your paper size in the Setup program:
If you are
using Word for Windows, version 2.0, follow these steps to
select the paper size:
1. From the top menu bar, select Format and then Page
Setup.
2. In the Page Setup dialog box, select the Size and
Orientation attribute button.
3. Select the Paper Size menu bar to choose
different options and select Legal (8.5 x 14 in).
4. Select OK to verify the changes.
In some MS-DOS applications, you may need to specify
the page length in lines per page. For letter-size paper, the
page length is 64 lines, and for legal-size paper, the page
length is 82 lines.