Canon BJ-200ex - Manual (Page 81)

2. Press and hold the LF/FF button.
3. Press the PRINT MODE button.
§ The printer beeps twice and the indicator for
the current print mode blinks to indicate the
printer is in 2/3 reduction mode.
§ To set the printer in 1/2 reduction mode,
press and hold the LF/FF button and press
the PRINT MODE button again. The
printer beeps three times.
4. Load paper and begin your print operation.
This mode may be overridden by your software.
To disable reduction mode, press and hold the LF/FF
button and press the PRINT MODE button (a third time).
The printer beeps once. When the indicator for the current
print mode (either HQ or HS) is on and not blinking,
reduction mode is cancelled. You can also turn off the
printer.
Selecting reduction mode cancels envelope mode (if set), and
selecting envelope mode cancels reduction mode (if set).
Performing Automatic Line Feeds
You can set the printer so that it performs an automatic line
feed each time it receives a carriage return. Then, when the
printer receives a carriage return code from the computer, it
moves to the beginning of the next line.
You only need to set this function if you are using an
application program that does not include a carriage return
with a line feed.
To set the automatic line feed function, follow these steps:
1. Make sure the printer is turned off.
2. Press and hold the ON LINE, LF/FF, and PRINT MODE
buttons, and then press the POWER button until the beeper
sounds.
If you notice an extra blank line between each line printed,
be sure to cancel this function.
To cancel the automatic line feed function, turn off the
printer.