Compaq MP1800 - Manual (Page 10)

1-4 Getting Started
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Setting Up the Projector
Follow the instructions below and on the following pages to set up
the projector. Separate setup instructions are described for the
following products:
!" Portable and desktop computers
!" Handheld computers with VGA capability
!" videocassette recorder, DVD, or camcorder (requires optional
Multimedia Video Adapter)
✎ The projector is hot pluggable and can be
connected to any video input source while
the source is in use.
IMPORTANT: Place the projector on a stable desk or table at a
distance
not less than 4.92 feet (1.5 meters) and not greater than 16.4 feet
(5 meters) from the projection screen.
!
WARNING: To reduce the risk of electric
shock or damage to your equipment:
!" Do not disable the power cord
grounding plug. The grounding plug
is an important safety feature.
!" Plug the power cord into a grounded
(earthed) electrical outlet that is
easily accessible at all times.
!" Disconnect power from the projector
by unplugging the power cord from
the electrical outlet.
!" Do not place anything on power
cords or cables. Arrange them so that
no one may accidentally step on or
trip over them. Do not pull on a cord
or cable. When unplugging from the
electrical outlet, grasp the cord by
the plug.