Adjusting the projected image – Compaq MP1800 User Manual
Page 19
Getting Started
1-13
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Adjusting the Projected Image
There are three ways to adjust the projected image:
!"
Adjusting the projector height
!"
Adjusting the projector focus
!"
Adjusting the projector zoom
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the projector
approximately 1 inch. To adjust the height:
1. Ensure the foot is turned 90° to balance the projector.
2. Raise the projector to the desired display angle, then press the
elevator button
➊ to release the elevator foot ➋.
3. To lower the display angle, press the elevator button again and
press down on the projector to lower it.