Compaq MP1800 - Manual (Page 51)

Care and Maintenance 5-1
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 5 Words: 916 Saved date: 05/17/004:44 PM File Name: Ch05
Chapter 5
Care and Maintenance
This section explains how to care for and maintain your Compaq
projector during normal everyday use.
Protecting the Projector
To protect your projector from overheating and other types of
damage, follow these suggestions:
■ Use only a power source and connection appropriate for this
projector as indicated on the marking label.
■ Do not overload an electrical outlet, power strip, or convenience
receptacle. The overall system load must not exceed 80 percent
of the branch circuit rating. If an extension cord or power strip
is used, make sure that the cord or strip is rated for the product
and that the total ampere ratings of all products plugged into the
extension cord or power strip do not exceed 80 percent of the
extension cord or strip ampere ratings limit.
■ Install the projector near an outlet that you can easily reach.
Disconnect the product by grasping the plug firmly and pulling
it from the outlet. Never disconnect it by pulling the cord.
■ Unplug the projector from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners.
■ Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push
objects of any kind into cabinet slots or other openings.
■ Do not drop the projector or place it on an unstable surface.
■ Do not expose this product to rain or moisture.
■ Do not allow anything to rest on the power cord. Do not walk
on the cord.