Compaq MP1800 - Manual (Page 39)

3-6 Using the Compaq Multimedia Adapter
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1005 Saved date: 05/17/004:43 PM File Name: Ch03
Connecting a Video Player
✎ If your video player uses a round, one-prong
composite video connector, use the RCA video cable.
If your video player uses a round, four-prong S-video
connector, use the S-video cable. Both cables are
included with the Compaq Multimedia Adapter.
1. Plug the RCA video cable into the video-out port on the video
player and the video port on the video adapter. If you are using
the S-video cable, connect it to the S-video out connector on the
video player and the S-video port on the video adapter.
2. Turn on the projector first, then the video player.
3. Press the Source button on the back of the Multimedia
Adapter to switch the projector signal from data (computer
icon) to video (TV icon). The data mode receives computer
inputs and the video mode receives video input such as a TV
tuner, videocassette recorder, or camera.
With the Compaq Multimedia Adapter attached, the projector is
compatible with major video standards such as NTSC, PAL, and
SECAM. Use the on-screen menu to adjust the video performance
manually or press the Resync button to optimize it automatically.