Compaq MP1800 - Manual (Page 68)

C-2 Flash ROM Upgrade
Part Number: 191443-001 - Writer: David Calvert - Saved by: J Abercrombie
Pages: 2 Words: 214 File Name: Flash ROM Upgrade Saved date: 05/17/00 4:44 PM
Complete the following steps to upgrade the projector’s
ROM:
1. Connect the DFP end of the cable to the DFP connector
on the projector and the DVI end of the cable to the input
end of the Flash ROM RS232 adapter.
2. Connect the other end of the Flash ROM RS232 adapter
to the RS232 (serial) connector on the computer.
3. Power on the computer and monitor only (if applicable).
4. Access Compaq’s web site at:
http://www.Compaq.com/Services/Projectors/
MP1800/Softpaqs.
5. Follow the steps outlined on the Web site.
6. Power on the projector.
7. Wait about two minutes to allow the Flash Upgrade
program to complete the upgrade, then the projector will
automatically reset and be ready to use.