Compaq MP1800 - Manual (Page 54)

5-4 Care and Maintenance
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 5 Words: 916 Saved date: 05/17/004:44 PM File Name: Ch05
Follow these steps to replace the projector lamp module:
1. Turn off the power to the projector by pressing the Standby
button
➊.
2. Allow the projector to cool down for at least 30 minutes.
!
WARNING: The lamp assembly operates at a very
high temperature. To reduce the risk of personal
injury, allow the projector to cool down for at least 30
minutes before opening the lamp cover. Never open
the lamp cover while the projector is operating or
when the lamp is hot.
3. Turn off the main power switch
➋.
4. Disconnect the power cord
➌.