Compaq MP1800 User Manual
Page 60
Troubleshooting A-5
Part Number: 191443-001 - Writer: David Calvert - Saved by: J Abercrombie
Pages: 5 Words: 974 File Name: Troubleshooting Saved date: 05/17/00 4:44 PM
Troubleshooting
(continued)
Problem
Solution
PIP does not operate.
Check the cable connections. If there
is a digital video source connected,
PIP will not operate. PIP is always the
inset picture, data will always be the
background picture.
Remote control does not
operate
The three AAA batteries may need to
be replaced.
Remote mouse does not
operate computer.
1. Make sure the Y-cable is
connected to both the computer
and the Multimedia Adapter. Do
not connect both the USB and
RS232 connectors to the
computer at the same time. The
USB connector is the preferred
connector.
2. If the RS232 connection is being
used, the remote control does not
function until the serial port is
initialized. You may need to
restart the computer to initialize
the serial port.
Compatibility issues with
equipment attached to the
projector.
Refer to Appendix C “Flash ROM
Upgrade” for more information.
If this does not resolve the problem,
contact your Compaq authorized
service provider or call Compaq
Customer Support for help. Refer to
the “Contacting Customer Support”
manual included in the projector
documentation kit for a complete list of
customer support numbers to call.
Image size is too small/large.
Adjust the manual zoom until the
image is the desired size.