Compaq MP1800 - Manual (Page 11)

Getting Started 1-5
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Balancing the Projector
The projector has a built-in elevator foot used to balance and
elevate the projector. Always balance the projector before
connecting any device to it.
Turn the elevator foot sideways to balance the projector.
!
WARNING: To reduce the risk of the projector
tipping or overturning, always turn the elevator foot
90 degrees from its original position before pressing
the elevator button. Refer to the “Adjusting the
Projector Height” section later in this chapter.