Compaq MP1800 User Manual
Page 55
Care and Maintenance
5-5
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 5 Words: 916 Saved date: 05/17/004:44 PM File Name: Ch05
5. Use the provided Phillips screwdriver to remove the screw
➍
from the lamp cover.
6. Remove the cover
➎.
7. On the left side of the lamp module, push the electrical
connector
➏ up to disengage it from the projector base.
8. Remove the three screws
➐ from the lamp module.
9. Pull out the lamp module
➑.
!
WARNING: To reduce the risk of personal injury,
do not drop the lamp module or touch the glass bulb.
The glass may shatter and cause an injury if it is
dropped.
Reverse the previous steps to replace the lamp module.
✎
After replacing the lamp module, remember to reset
the lamp hours in the on-screen menu.
IMPORTANT: The lamp contains < 0.125 percent mercury by
weight. If the projection lamp breaks, the mercury may be released
into the atmosphere. Please follow applicable federal, state, and
local regulations for disposal and/or recycling.