Compaq MP1800 - Manual (Page 27)

Using the Projector 2-3
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1439 Saved date: 05/17/004:43 PM File Name: Ch02
IMPORTANT: To use standby mode, press the Standby button
and, after a six to ten-second delay, the unit enters standby mode
and the projector lamp turns off. A “Going to Standby” message
appears on the screen for the duration of the six to ten-second delay.
When the message disappears from the screen, there is a 45-second
delay before the lamp can be turned back on. Wait 45 seconds to
allow the lamp to cool before pressing the Standby button again.
Introducing the Analog On-Screen Menu
The adjustments for screen settings are located in the on-screen
menu and can be viewed in one of seven available languages.
Analog On-Screen Menu Adjustments
To display the analog on-screen menu, press the Select button.
The following menu shows the functions at each level:
Main Menu Menu Level 2 Menu Level 3
Brightness Adjustment scale
Contrast Adjustment scale
Position Horizontal Position
Vertical Position
Save and Return
Cancel Adjustment scale
Adjustment scale
Zoom Zoom
Panning Left-Right
Panning Up-Down Adjustment scale
Adjustment scale
Adjustment scale
Save and Return
Cancel
Keystone Adjustment scale
Picture Dark - Light
Color (Color temperature)
Custom Color
Saturation
Save and Return
Cancel
Adjustment scale
Adjustment scale
Digital
Conversion Clock
Clock Phase
Save and Return
Cancel Adjustment scale
Adjustment scale
Continued