Vertical Communications 8324S - Manual (Page 10)

NOTE: Pressing any button (mute, hold, etc.) on the speakerphone
while in full-duplex mode causes the system to perform the
“speech training” test again. For example, if you press MUTE
while in full-duplex mode, when you release the call from
mute, the system will perform the entire “speech training” test
again.
1.2.2 Speakerphone User Guidelines
NOTE: The speakerphone user guidelines in this section do not apply
to the Impact SCS 8324F-** when it is operating in full-duplex
mode. However, when the 8324F-** is in half-duplex mode or
in “speech training” mode, the following guidelines are
applicable.
•
Both parties can not talk at the same time. You must wait for silence
out of your loudspeaker before talking. You must stop talking to hear
the other party.
• Background noise may prevent the sound-activated switches from
operating properly. Avoid placing the speakerphone where it will
detect sounds from typewriters, keyboards, printers, paging systems,
and other equipment.
•
Speak slightly louder than normal and with a clear, authoritative voice.
For the microphone to best detect your voice, speak within three feet
of it and face the telephone.
•
Raising the volume of the loudspeaker makes it easier for the
sound-activated switches in your telephone to select the distant party’s
voice. Lowering the volume of the loudspeaker makes it easier for the
switches to select your voice.
•
Since the system takes several seconds to provide the best switching,
constant sound patterns—such as elongating your words and playing
externally-supplied music—may prevent the sound-activated switches
from operating properly.
• Place the telephone on a hard surface and away from table edges. Do
not place the telephone in corners or enclosures. Do not let
obstructions come between you and the microphone. Rooms with hard,
flat surfaces that reflect sound may affect the sound-activated switches.
Introducing The LCD Speakerphone GCA70–250
1 – 4 LCD Speakerphone Reference Manual