Vertical Communications 8324S - Manual (Page 39)

3.8 Camping On At A Busy Station
And Waiting For An Automatic Callback
If you call another station and receive a busy signal or a Do Not Disturb
tone, you can press a button that will cause the system to ring your
telephone when the station is available. This is called “camping on at a
station.” Please note that you can camp on to only one station at a time.
•
To camp on at any busy station,
1. Press CAMP.
2. Your telephone immediately hangs up. When the station you called
becomes available, your telephone will ring with five short tone
bursts.
•
When you hear five short tone bursts,
1. Press INTERCOM. The other telephone will start ringing.
2. If you do not press INTERCOM after the ring back tones within
the time limit set by the installer, the call back is canceled at that
time; however, you can cancel automatic call back at any time
before your telephone sounds the tone bursts.
•
To cancel the call back before your telephone sounds the tone
bursts,
1. Press INTERCOM and dial # 6.
•
To camp on at a station with a Do Not Disturb condition set,
1. Press CAMP. A call back will occur when called station is no
longer set in the Do Not Disturb mode.
GCA70–250 Making Calls
LCD Speakerphone Reference Manual 3 – 11