Vertical Communications 8324S - Manual (Page 79)

•
To use Tracker to transfer a call to a park orbit for retrieval and
transmit the call’s park orbit code and caller ID information (if
available),
1. Answer call and press TRANS.
2. Dial extension number.
3. If the called station does not answer or is busy, press TRACK.
4. Hear confirmation beep (Tracker page accepted) or hear busy tone
(Tracker page not accepted).
5. Press SPEAKER button to end.
NOTE: Tracker parked calls will recall to your station after a
pre-programmed time-out. You can either place the call into
another Tracker page orbit or retrieve the call for servicing.
•
To retrieve a call that you parked using the Tracker option,
1. Press HOLD button to scroll your held calls, (display shows Page
and extension number of each parked call).
2. Press TAP to retrieve the displayed parked call.
•
If you receive a parked call message on your Tracker pager,
1. Go to any system station.
2. Press INTERCOM.
3. Dial Tracker pager displayed orbit code (#800–#899).
4. Retrieve call.
•
To enable or disable a Tracker pager at your station,
1. Press INTERCOM.
1. Dial ✳06 to disable,
—OR—
dial ✳07 to enable.
2. Press SPEAKER to end.
GCA70–250 Using The Other Telephone Features
LCD Speakerphone Reference Manual 7 – 23
telemanuals . com