Vertical Communications 8324S - Manual (Page 101)

9.5 Storing The Response Message Button
You may program a RESPONSE MESSAGE button, which allows you
to send an LCD message to a caller who has initiated a SOHVA or
intercom call from another LCD telephone, or to send an LCD message
to another LCD telephone that you call and receive a busy signal or no
answer.
There are two types of RESPONSE MESSAGE buttons you can
program at your station:
• A scrolling RESPONSE MESSAGE button lets you choose from 30
system-supplied messages each time you press the button.
• One or more fixed RESPONSE MESSAGE buttons that will send
the same preselected message every time you press it. If, for example,
you know that you want to send the message I Will Call Back every
time you receive a SOHVA you cannot respond to, program a fixed
RESPONSE MESSAGE button with that message and label the
button accordingly.
Before programming, obtain a list of system-supplied messages from
your attendant or system installer so that you can choose an appropriate
message.
•
To store a scrolling RESPONSE MESSAGE button, proceed as
follows,
1. Press INTERCOM.
2. Dial ✳ ✳ 6.
3. Press programmable button for RESPONSE MESSAGE button
location.
4. Dial 00.
5. Press # to save programming.
6. Press SPEAKER to end.
7. Label button location.
GCA70–250 Programming Your Telephone
LCD Speakerphone Reference Manual 9 – 7