Vertical Communications 8324S - Manual (Page 122)

10.8 Setting The Night Transfer Of Ringing Mode
You can enable an operating mode that automatically transfers all
incoming calls to a particular telephone or group of telephones for
answering.
•
To enable or disable the night transfer of ringing mode,
1. Press INTERCOM.
2. Dial ✳ # 0 ✳ 0 3.
3. Dial 1 to enable the feature,
—OR—
dial 2 to disable the feature.
4. Press SPEAKER to end.
NOTE: Your system installer can program a button on your telephone
that will enable or disable night transfer of ringing with one
touch. If you have this button, the BLF light next to the button
will flutter when night transfer of ringing mode is enabled.
Using The Attendant Features GCA70–250
10 – 18 LCD Speakerphone Reference Manual