Vertical Communications 8324S - Manual (Page 40)

3.9 Camping On At An Idle Station
And Waiting For An Automatic Callback
If you call another station and hear ringing but receive no answer, you
can press a button that will cause the system to ring your telephone when
any activity is initiated at that station.
•
To camp on at a station for which you hear ringing but receive no
answer,
1. Press CALLBK button. Callback will occur after any activity is
initiated at dialed station. You may cancel the camp-on condition at
any time by pressing INTERCOM and dialing # 6.
NOTE: This feature is not applicable to calls you make in the voice
announce mode.
3.10 Camping On At A Busy Station
And Waiting For An Answer (Call Waiting)
If the telephone you have called is busy, you can send a call-waiting tone
to the telephone and wait on the line for an answer (you must be using
the handset for this feature to work).
•
To activate call waiting when you hear a busy signal,
1. Dial ✳ 6 (called party hears tone).
2. Wait on line for reply.
3. Called party can place the current call on hold or disconnect from
the call to answer your call-waiting tone, or choose to ignore your
call-waiting tone and continue current conversation.
•
To cancel call waiting,
1. Press INTERCOM, then dial # 6.
2. Hang up or press SPEAKER to end.
Making Calls GCA70–250
3 – 12 LCD Speakerphone Reference Manual