Owner s manual, Obd2 car scanner – Roadi RDT51 User Manual
Page 100
OWNER S MANUAL
,
OBD2 Car Scanner
96
CHECK
1)
Use UP/DOWN scroll button to select Read Codes from
Diagnostic Menu and press ENTER button.
Diagnostic Menu
====================1/11
Trouble Codes
=====================—-
=======================
2) Use
UP/DOWN scroll button to select Stored Codes or Pending
Codes from the Trouble Codes menu and press ENTER button.
If there are no Diagnostic Trouble Codes present, the display
indicates "“No (pending) codes are stored in the module!”" Wait a
few seconds or press any key to return to
Diagnostic Menu.
The control module number, sequence of the DTCs, total number
of codes detected and type of codes (Generic or Manufacturer
specific) will be observed on the upper rig ht hand corner of the
display.
3) View DTCs and their definitions on screen.
Engine Coolant Temperature
Sensor 1 Circuit Hig h
$09
1/5
P0118
Generic
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
O2 Monitor Test
Stored Codes
Pending Codes