Roadi RDT51 - Manual (Page 146)

OWNER S MANUAL
,
OBD2 Car Scanner
142
CHECK
Trouble Codes
====================1/3
Stored Codes
Pending Codes
Permanent Codes
If there are no Diagnostic Trouble Codes present, the display indicates
"No (pending) codes are stored in the module!" Wait a few seconds
or press any key to return to
Diagnostic Menu.
Press Permanent Codes, the auto scanner will show all trouble
code history, which happened into the vehicle ECU, even if these
are erased already!
=======================
The control module number, sequence of the DTCs, total number of
codes detected and type of codes (Generic or Manufacturer specific) will
be observed on the upper rig ht hand corner of the display.
3). View DTCs and their definitions on screen.
Engine Coolant Temperature
Sensor 1 Circuit Hig h
$09 1/5
P0118 Generic
4). If more than one
DTC is found, use UP/DOWN scroll button, as
necessary, until all the codes have been shown up.
If retrieved DTCs contain any manufacturer specific or enhanced codes,
a
"Manufacturer specific codes are found! Press any key to select
vehicle make!" message comes up prompting you to select vehicle
manufacturer to view DTC definitions. Use
UP/DOWN scroll button to
select manufacturer and then press
ENTER button to confirm.
Vehicle Manufacturer
====================1/51
Alfa Romeo
Audi/VW
BMW
Buick
Cadillac
Chevrolet