Roadi RDT51 - Manual (Page 55)

OWNER S MANUAL
,
OBD2 Car Scanner
51
CHECK
Erase Codes
=============================
Erase Codes
=============================
3). Press
ENTER button to confirm.
If the codes are cleared successfully, an "Erase Done!" confirmation
message shows on the display.
Erase Done!
Press any key to con.
Erase Failure.
Turn Key on with
Engine Off!
Press any key to con.
If the codes are not cleared, then an
"Erase Failure. Turn Key on
with Engine off!" message appears.
4). Press any button to return to Diagnostic Menu.
If you do not want to proceed with erasing codes, press ESC button
or use
LEFT/RIGHT scroll button to select NO to exit. A message of
"
Command Cancelled!" show ups. Wait a few seconds or press any
key to return to Diagnostic Menu.
Erase Codes
=============================
Erase trouble codes!
Are you sure?
YES NO