Roadi RDT51 - Manual (Page 111)

OWNER S MANUAL
,
OBD2 Car Scanner
107
CHECK
Record Data
===================-=-=
RecordData
====================2/3
Custom Data Set
=======================
If you wish to playback recorded data, press ENTER button;
if you do not wish to playback, press
ESC button, or use LEFT/
RIGHT button to select NO and press ENTER button to return
to
Record Data menu.
Recording Custom Data Set
8) To record customized data, use
UP/DOWN scroll button to select
Custom Data Set from Record Data menu and press ENTER button.
9) Observe on-screen instructions. Wait a few seconds or press any
key to continue.
[ ] – Select/deselect
[ ] – Deselect all
[ENTER] – Confirm
[ESC] - Cancel
10) Use
RIGHT button select/deselect data parameters. Selected
Complete Data Set
Custom Data Set
Unit of Measure
Complete Data Set
Custom Data Set
Unit of Measure