Roadi RDT51 - Manual (Page 102)

OWNER S MANUAL
,
OBD2 Car Scanner
98
CHECK
Diagnostic Menu
====================2/11
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
O2 Monitor Test
2)A warning message comes up asking for your confirmation.
Erase Codes
=======================
Erase Codes
=======================
Erase trouble codes!
Are you sure?
YES NO
3)Press ENTER button to confirm.
If you do not want to proceed with erasing codes, press
ESC button
or use
LEFT/RIGHT scroll button to select NO to exit. A message
of "Command Cancelled!"” show ups. Wait a few seconds or press
any key to return to
Diagnostic Menu.
If the codes are cleared successfully, an "“Erase Done!”"confirmation
message shows on the display.
Erase Done!
Press any key to con.
If the codes are not cleared, then an
Erase Failure. Turn
Key on with Engine off!” message appears.