Roadi RDT51 - Manual (Page 158)

OWNER S MANUAL
,
OBD2 Car Scanner
154
CHECK
Select Memory
=======================
Manual Trigger
=======================
DTC Trigger
=======================
A previous recording
exists! Do you want
to overwrite it?
YES NO
If you do not wish to proceed with overwriting old recording, press
ENTER
button; if you do not wish to overwrite it, press ESC button, or use
LEFT/
RIGHT button to select NO and press ENTER to pick another memory
location.
13) Observe on-screen instructions.
If
Manual Trigger is selected, following screen shows:
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
If
DTC Trigger is selected, following screen shows:
Waiting for DTC to
trigger recording…
Press [ESC] to exit
14). Wait for DTC to trigger recording or press
ENTER to start recording.
Recording… 5/60…
===================-==6
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C ) -40
SHRTFT1(%) 0.0